TK64 Roll On Application; Water Based Coating; Protects Trailer Floors, Ramps and Walls; Non Skid Paint (Gray, 2 Gallons, 1 Foam Cover)

TK64 Trailer Floor Coating is a water-based, plastic coating formulated to withstand abrasion in automotive, industrial and agricultural environments. It offers a textured slip-resistant finish in either black (satin finish) or grey. Apply with included 3/8" foam roller. 2 coats minimum required. Excellent adhesion on metals, wood, concrete, and painted surfaces. Use only outdoors or in a well-ventilated area. TK64 should not be exposed to temperatures below 60°F during the application and the curing process. Use proper protective eyewear and clothing.Do Not Freeze and Do Not Store In Direct Sun. 1-year shelf life. Excellent adhesion on plywood, treated plywood, oriented strand board (OSB) and bare wood. Ideal for 4x4 tubs, roll bars, bumpers, underbodies, wheel wells, rocker panels, trailer floors and DIY pick-up beds. New trailer floors will only require a light sweeping out before application. Used trailer floors require a more thorough cleaning with special attention to oil spots and gasoline spills. For used trailer floors, remove/replace rotted wood and splinters, fill in major cracks/holes with paintable wood putty. Clean floor with waterborne degreaser (i.e. citrus degreaser). Rinse thoroughly with hose/pressure washer and allow for the floor to completely dry. Repeated cleaning of oily spots might be necessary to ensure proper adhesion. A fan will increase air flow and reduce drying time.

• Coating Overview: Water-based plastic coating designed to resist abrasion in automotive, industrial, and agricultural environments; provides a textured, slip-resistant surface in black or grey.
• Application: Apply outdoors or in a well-ventilated area using the included 3/8" foam roller; use a minimum of two coats; avoid temperatures below 60°F during application and curing.
• Surface Compatibility: Adheres to metals, wood, concrete, painted surfaces, plywood, treated plywood, oriented strand board (OSB), and bare wood.
• Preparation: New trailer floors require light sweeping; used floors should be cleaned thoroughly, oil and fuel residues removed, and damaged areas repaired before coating.
• Handling and Storage: Clean tools with water while wet; do not freeze or store in direct sunlight; wear protective eyewear and clothing; product has a one-year shelf life.